VAG COM VCDS 17.1 Cable VCDS 17.1 interface China vcds 17.1 full version
Firmware Version: 1.96
Support Languages: English 
System requirement: Windows XP, Vista, 7, 8, 8.1, and 10(32-bit and 64-bit)
(It does not support Windows 95, 98, ME, and NT4 operating system)

VCDS release 17.1 New added functions than old version vcds cable:
Support for MLB2 platform cars (HEX-NET interface recommended)
Support for 2016 and early 2017 model cars
Greatly expanded the amount of DTC Freeze-Frame data dsiplayed
Improvements in Advanced Measuring Value Selection Window
Display of factory identifiers instead of arbitrary location numbers
Support for Six-Digit security access codes
HEX-NET Turbo and other speed optimizations
Optimized low-level timing routines and CPU core affinity
Major firmware enhancements for HEX+CAN and Micro-CAN interfaces
Improved UDS mapping speed and reliability when subchannels are present; progress indicators.
Fixes SRI reset in newer Crafter instruments.
New ASAM data and Label Files
Many other small fixes and improvements introduced in Beta versions 16.3-16.7.

Vag com VCDS 17.1 New Features:
0. Auto Scan 1001.01
1. Control module unit information
2. Read fault codes 004.01
3. Output test 005
   Selective output test 005
4. Basic settings 006
5. Clear DTCs 004.10
6. Close control module 022
7. Pairs of coding control module (brush hidden) 007 (service 1A)
   008 (Service 22) From the station control module 007 coding (service 1A)
   008 (Service 22) Read measured value block 08 010.02 (KWP1281)
8. Advanced measurement reading
9. channel read 010.01
10. matching 012 014 (long)
11. Log (Known under KWP-2000 * Coding II) 015.01
12. View readiness 020.01 Guided ready state settings
13. security access 015.02
14. All supported DTCs
15. Common OBD-II function
16. Fault environmental data
17. Dual K-Line Support 7-PIN code 020.07
18. Upgrade to the latest fault code library
19. Direct CAN line diagnosis (Need to support diagnostic cables CAN line diagnosis)
20. Modes of transport 1001.03 (on)1001.04 (off) (Need to support diagnostic cables CAN line diagnosis)
21. Advanced measurement block
22. Support for dual engine control module

VCDS 17.1 Note:
1. Version 17.1 must be used to Ross-Tech's HEX-, KEY-, KII-, or Micro-CAN series of "smart" diagnostic cables
2. You can not be used elsewhere to buy or produce their own diagnostic cable
3. VCDS Chinese program is installed by default in the following directory: C: Ross-Tech VCDS-ZHS
4. If you are using more than 7 operating system Windows Vista or Windows, please do not install the VCDS in the system Program Files directory

Vag com 17.1 Packing List:
1 x Vag com 17.1 diagnostic cable
1 x CD with VCDS 17.1 software